Tuesday, February 14, 2017

WF2220 300Mbps Wireless N Access Point



WF2220 300Mbps Wireless N Access Point

The netis 300Mbps Wireless N Access Point WF2220 provides long range, high performance wireless Internet access over large areas. It provides you multiple wireless modes including AP, Repeater, WDS, Multi-SSID, for flexible wireless network setup and deployment. Also, with the Turbo button, you may easily control the transmission power. Under the high power mode, you will enjoy much better network experience in large homes, multi-floor offices or warehouses.

firmware netis(WF2220)EN-V1.2.30391
  • Incredible wireless high speed up to 300Mbps
  • High transmission power to boost wireless signal for further distance
  • Enhanced signal strength to penetrate walls and eliminate Wi-Fi dead zones
  • High gain 5dBi detachable antenna design allowing for flexible antenna upgrade
  • Multiple wireless modes- AP, Repeater, WDS, Client,Multi-SSID(VLAN)
  • Multi-SSID providing up to 3separate networks for guests and friends
  • Wireless schedule function helping you to control your wireless online time reasonably
  • Easy wireless security setup at a push of the WPS button
  • Turbo button to improve the signal strength in a snap
  • Passive PoE(Power over Ethernet) for flexible deployment
  • Quick setup, with built-in web management page


Wireless
Standards IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Signal Rate Up to 300Mbps
Frequency Range 2.4-2.4835GHz
Transmit Power 23dBm(MAX)
Data Transfer Rates 802.11n:
40MHz(300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps)
20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense)
801.11g:
(54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps)
802.11b:
(11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps)
Wireless Modes AP, Repeater,WDS, Multi-SSID(VLAN)
Wireless Security 64/128-bit WEP,
WPA-PSK/WPA2-PSK (TKIP/AES)
SSID Broadcast Enable/Disable
Wireless MAC Filtering
Hardware
Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Interface 1 * 10/100Mbps Auto MDI/MDIX RJ45 LAN port, Passive PoE Supported
LED Indicators PWR, Turbo, WPS, LAN
(Turbo LED Status: Blue for Normal Power, Red for High Power)
Buttons Turbo, Default, WPS
Antenna 2* 5dBi Detachable Antenna, SMA Connector
Power Supply DC 12V/1A (Output)
Software
LAN DHCP Client, DHCP Server
Others Time Settings,Firmware Upgrade, Backup & Restore
Others
Certification FCC, CE
Environment Operating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Package 1* WF2220
1* 12V/1A Power Adapter
1* PoE Power Injector
1* Ethernet Cable
1* Quick Installation Guide
 

Firmware

Explanation

1.Do NOT turn off the power during upgrade.
2.Do NOT upgrade the firmware through wireless connection unless the device only has wireless connection.
3.It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before upgrade.
4.Use decompression software such as WinZIP or WinRAR to extract the file you download before upgrade.
Note: netis does not provide technical support or guarantee the performance and stability of third party firmware such as DD-WRT. Damage to the product as a result of using third party firmware will void the product's warranty.11
Version Description Date Size Language Download
netis(WF2220)EN-V1.2.30391 First Release
2014-11-05
2.81MB
English
link1 link2 link3 link4

No comments:

Post a Comment